HOT ! Staff Pick｜ Other Products ｜PurEpoxy Aliphatic Urethane (P-AU100)

P-AU100 is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat.
It is available in clear gloss, clear satin and can be pigmented. It is VOC Compliant in all states and provinces in North America. It cures to an inert, tough, impact, abrasion and chemical resistant finish coat. It is resistant to Skydrol, betadine and conventional hot-tire staining. Excellent adhesion to PurEpoxy’s epoxy system. It requires a primer, Polyurethane-Acrylic Primer and Concrete Sealer, when it is applied to properly prepared concrete and cementitious overlays. It is used as an upgraded finish coat on PurEpoxy products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, forklift traffic and chemical attack.

PACKAGING
1 US gal (4 L)

COVERAGE RATE
800 ft2/gallon

RECOMMENDED THICKNESS
3.2 wet mils (81 microns)

MIX RATIO, BY VOLUME
A: B = 4: 1 + 1lb Aluminum Oxide

DENSITY (KG/L)
Part A: 1.14Part B:0.90Mixed: 1.09

POT LIFE
60 minutes @ 77°F (25°C)

WORKING TIME
30 minutes

VOC
75.4 g/L

 
Brand:PurEpoxySKU:2665-5530Tags:Polyurethane