HOT ! A Fresh Look｜TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP｜ Other Products

Key Features

Microphone/Line Input Switching
48V Phantom Power
Mic Input Pad
Microphone Gain
Compressor
4-Band EQ
Auto Level Control
Mute, Fader, Grouping

Overview
The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
The MX-8A's onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric EQ, auto level, ducking, and more. In addition, the output DSP offers 10-band EQ, high-pass filters, low-pass filters, delay, and limiter effects.
Additionally, Tascam's MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam's EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.
Key Specs

Format

44.1 kHz / 48 kHz, 16-Bit / 24-Bit

Connector

4-Pin USB b-Type

Transfer Rate

USB 2.0 High-Speed (480 Mbps)

Analog In

Connector: Euroblock (Balanced) 3.81 mm Pitch

Minimum Input Level

-70 dBu

Maximum Input Levels

Microphone: +26 dBuLine: +24 dBuInput Impedance: 2.2 kOhms or Higher

Analog Output

Connector: Euroblock (Balanced) 3.81 mm Pitch

Nominal Output Level

+4dBu (When Ref.Level Set to Other Than -9 dBFS)+6dBu (When Ref.Level Set to -9 dBFS)

Maximum Output Level

Switchable:+15 dBu (Ref.Level: -9 dBFS)+18 dBu (Ref.Level: -14 dBFS)+20 dBu (Ref.Level: -16 dBFS)+22 dBu (Ref.Level: -18 dBFS)+24 dBu (Ref.Level: -20 dBFS)

Output Impedance

200 Ohms or Lower

RS-485

Connector: RJ-45Cables: Category 5e or Faster STP Cables

Ethernet

Connector: RJ-45Transmission Protocol: TCP/IPEthernet Standard: 100BASE-TXCables: Category 5e or Faster STP Cables

Power

AC 100 to 240 V, 50/60 Hz

Power Consumption

21 W

Operating Temperature Range

32 to 104°F / 0 to 40°C

Dimensions

19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm

Weight

6.6 lb / 3.0 kg

Packaging Info

Package Weight

10.04 lb

Box Dimensions (LxWxH)

21.6 x 17.2 x 5.9"

What's in the Box:

TASCAM MX-8A 8-Input / 8-Output Matrix Mixer with DSP
Power Cord
16 x Euroblock Plugs
Cable Band Kit
Rackmount Screw Kit

Limited 1-Year Warranty for Parts, 90-Day Warranty for Labor
Brand:TASCAMSKU:MX-8ATags:audio interface, Matrix Mixer, System Processors, TASCAM, TASCAM Mixer, TASCAM MX-8A